Centurion USA Corp 6030, NW 99th Ave # 417, Doral, FL 33178

305 - 722 59 10 acosta@centurionusacorp.com   EnglishPortugueseSpanish
  

DR-100MKIII

Flexible powering methods—batteries, USB bus power, or an AC adapter—make the DR-100mkIII well suited to on-the-go recording and all-day video shoots. Its dual-battery structure utilizes an internal rechargeable 12-hour battery and two AA batteries (available separately) to deliver prolonged operating time.

Category: Tags: , , Product Brand:

Description

 

World class audio performance

AKM AK4558 converters with VELVET SOUND architecture deliver a S/N ratio of 102dB

Used in a variety of combinations, depending upon the selected function, the DR-100mkIII features dual AKM AK4558 converters with VELVET SOUND architecture, providing both high sound quality and low power consumption, achieving a signal-to-noise ratio of 102dB.

Dual ADC mode, using two AK4558 converters in parallel operation, provides a S/N ratio of 109dB

The dual ADC mode uses two AK4558 AD converters in parallel operation. Signal-to-noise ratio is maximized and audio fidelity is improved, delivering a 109dB S/N ratio as compared to the (already excellent) 102dB S/N ratio achieved when recording in standard mode.
Note: As the S/N ratio when recording exceeds the S/N ratio of the entire circuit, data recorded in dual ADC mode will be limited to a 102dB S/N ratio when played back on the DR-100mkIII. This does not affect the S/N ratio of the actual file, which is maintained at 109dB S/N

DR-100MKIII

DR-100MKIII

External microphones supported with XLR/TRS inputs and built-in low-noise HDDA mic preamps

The XLR/TRS inputs, used to connect external mics, deliver the highest sound quality and lowest noise of any TASCAM Handheld Digital Recorder. HDDA (High Definition Discrete Architecture) mic preamps are also included to maintain a pristine audio signal path throughout.

DR-100MKIII

Onboard dual (directional/omnidirectional) stereo microphones with integrated shockmounts deliver flexible recording options while retaining professional quality audio performance

A newly designed microphone housing for the directional mics is based on exhaustive research of previous TASCAM hand held recorders and achieves the perfect marriage of protection and performance. Similarly, the omnidirectional stereo microphone setup features sound pressure level tolerance of 125 dB SPL – able to withstand virtually any audio environment.
DR-100MKIII

DR-100MKIIISupports up to 192kHz/24-bit recording

The TASCAM DR-100mkIII supports high definition recording at both 96kHz/24-bit and 192kHz/24-bit, ensuring that remote recordings achieve the same sonic fidelity as their studio-born counterparts.

Shock mount structure

An integrated shock mount structure for the directional stereo microphone suppresses unwanted vibration and handling noise.

DR-100MKIII

TASCAM reliability and features designed for professionals in the field

Dual battery structure allows the built-in high-capacity lithium-ion battery to be used along with 2 AA batteries

With a dual battery structure that allows the built-in high-capacity lithium-ion battery to be used with in concert with AA batteries, operation is possible for extended periods of time ensuring that the DR-100mkIII is ready to go when you are. Additionally, the DR-100mkIII can be rapidly charged by connecting an AC adapter and even support USB Bus power from an external battery pack commonly used to charge mobile phones and tablets.

DR-100MKIII

TASCAM’s unique Dual Level recording function allows simultaneous recording of a backup file at a lower gain level

TASCAM’s exclusive Dual Level Recording function simultaneously records a secondary backup file at a lower gain level than the primary recording. This safety file, recorded at a 12db lower level protects your recording session from unexpected volume spikes and accidental overload.
DR-100MKIII

Locking XLR/TRS combo jacks made by Amphenol

Locking XLR/TRS combo jacks made by Amphenol ensure high reliability in the field and protect against unwanted connectivity issues.
DR-100MKIII

Tough aluminum body to deliver years of reliable use

Marrying light weight with long-term reliability, the TASCAM DR-100mkIII’s tough aluminum body ensures many years of trouble-free use.
DR-100MKIII

High-precision clock featuring a temperature-compensated crystal oscillator (TCXO)

The precision of the built-in clock is crucial when digital recordings made on what device are to be used in conjunction with materials recorded on other devices, such as when combining digital audio and video assets. To ensure stability, the DR-100mkIII utilizes the same Temperature-Compensated Crystal Oscillator (TCXO) used in professional studio master recorders. Moreover, the TCXO is not affected by the temperature of the environment, critical for a portable device which must maintain its precision in support of high-quality recording.
DR-100MKIII

The TASCAM DR-100mkIII offers improved usability based on user feedback

When working on location, decisions must be made quickly and efficiently, and an intuitive and consistent User Interface is critical. By gathering feedback from users of the original DR-100 and the MKII, we have been able to add a variety of usability enhancements designed to streamline workflow and help audio professionals achieve success quickly and efficiently.

The user interface has been designed to provide clear visual feedback, and includes both a large LCD screen and dedicated status LEDs

The user interface has been designed to maximize visual confirmation, and includes a large LCD screen (double the size of the screen on the DR-100mkII), dedicated status LEDs for features such as record levels and status and easy-to-read legends on the casework.
DR-100MKIII

Select hardware switches for quick and positive setting control

Dedicated hardware controls have been implemented for the most commonly accessed features to enable quick, positive operation in the field.
DR-100MKIII

Dual format recording function allows simultaneous recording of both WAV and MP3 files

Dual format recording function allows simultaneous recording of both uncompressed WAV(BWF) and MP3 files. This provides the user with instant access to both the original, full resolution master file and a compressed MP3 file (with a much smaller file size) for easy emailing or posting to social media sites.
DR-100MKIII

XRI(eXtended Recording Information) function

XRI (eXtended Recording Information) function stores keeps track of all recording settings as part of the file. This powerful features allows the user to easily double-check the details of the original recording for logging or replication of recording conditions at a later date. This information includes date and time of recording, input sources selection and levels, ADC mode on/off status and more. XRI information is stored as part of the BWF data block.
DR-100MKIII

SPECS


Recording Media SD card (64MB to 2GB), SDHC card (4GB to 32GB), SDXC card (48GB to 128GB)
File format WAV (BWF), MP3
WAV 44.1k/48k/88.2k/96k/176.4k/192k Hz,
16/24-bit
MP3 44.1k/48k Hz,
128k/192k/256k/320k bps
Number of channels 2 channels  (stereo)
Playback Speed Control (VSA) –50% to +200% (1% step)
Analog audio inputs
MIC/LINE IN
Connector XLR-3-31 (1: GND, 2: HOT, 3: COLD),
1/4″ (6.3mm) TRS standard jack
XLR: Phantom power compatible
MIC IN
Input Impendance
XLR 2kΩ or more
TRS 20kΩ or more
Minimum Input Level –70.5dBu (PAD Off)
Maximum Input Level –14dBu (PAD On)
LINE IN
Input Impendance 20kΩ or more
Nominal Input Level +4dBu
Maximum Input Level +24dBu
EXT IN
Connector 1/8″ (3.5mm) Stereo mini jack
(this connector can be supplied plug-in power)
EXT MIC
Input Impendance 50kΩ or more
Minimum Input Level –46.8dBu (PAD Off)
Maximum Input Level –2.8dBu (PAD On)
EXT LINE
Input Impendance 2kΩ or more
Nominal Input Level +6dBV
Maximum Input Level –10dBV
Analog audio outputs
LINE OUT
Connector 1/8″ (3.5mm) Stereo mini jack
Output Impedance 200Ω
EXT LINE
Nominal Output Level –14dBV
Maximum Output Level +6dBV
OTHER
Nominal Output Level –10dBV
Maximum Output Level +6dBV
PHONES
Connector 1/8″ (3.5mm) Stereo mini jack
Maximum Output 40mW+40mW (32Ω loaded)
Built-in Speaker 0.4W (mono)
Digital Input
DIGITAL IN
Connector 1/8″ (3.5mm) Stereo mini jack
Format AES3-2003/IEC60958-4 (AES/EBU), IEC60958-3 (S/PDIF)
CONTROL
USB
Connector Micro-B type
Format USB2.0 HIGH SPEED mass storage class
REMOTE
Connector 2.5mm TRS jack
Model RC-10, RC-3F
Tripod attachment screw-hole 1/4″ Tripod attachment screw-hole
Power Supply Built-in lithium-ion rechargeable battery (3,950mAh)
2 AA batteries (alkaline, rechargeable NiMH or disposable lithium)
USB bus power
AC adapter (TASCAM PS-P520E, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
Power consumption 7.5W (maximum)
Battery operation time STEREO WAV (BWF), 44.1kHz, 16-bit, *All times are approximate.
Built-in lithium-ion rechargeable battery 12 hours (UNI MIC, Phantom OFF)
6 hours (MIC IN, Phantom ON +48V)
Alkaline battery
(EVOLTA)
2-¾ hours (UNI MIC, Phantom OFF)
1 hour (MIC IN, Phantom ON +48V)
Lithium battery
(Energizer ULTIMATE LITHIUM)
7 hours (UNI MIC, Phantom OFF)
3-½ hours (MIC IN, Phantom ON +48V)
Dimensions (W×H×D) 3.1″ × 6.1″ × 1.4″ / 80 × 155.7 × 35 mm
Weight 15.0 oz. / 425 g (including batteries)
13.2 oz. / 375 g (excluding batteries)
Operating temperature 32˚F to 104˚F / 0˚C to 40˚C
Accessories Digital input conversion cable, Owner’s manual(including warranty)

 

Audio performance

Frequency response
Fs=44.1k/48k Hz 20Hz to 20kHz +0.5dB/–1dB
Fs=88.2k/96k Hz 20Hz to 40kHz +0.5dB/–2dB
Fs=176.4k/192k Hz 20Hz to 80kHz +0.5dB/–4dB
Distortion 0.007% or less(Fs=44.1k/48k/88.2k/96k/176.4k/192k Hz, JEITA)
S/N ratio 102dB or more (Fs=44.1k/48k/88.2k/96k/176.4k/192k Hz, JEITA)
Equivalent input noise 124dBu or less

 

List of function and performance improvements as compared to the TASCAM DR-100MKII

DR-100MKIII DR-100MKII
Maximum Sampling rate 192kHz 96kHz
Supported Media SDXC (up to 128GB) SDHC (up to 32GB)
AD/DA for External Input AKM AK4558 AKM AK4556
Audio Clock Accuracy TCXO/1ppm 30ppm
Display size 128×128 128×64
Operating Language ENG/FRA/ES/DEU/ITA/JPN ENG
Headphone Amplifier 40mW+40mW 25mW+25mW
Low Cut Filter 40/80/120/220Hz 40/80/120Hz
Peak Reduction Supported N/A
Power-on Rec function Supported N/A
Dual Rec function Supported N/A
Dual Format function Supported N/A
Floating Structure for unidirectional mics Yes N/A
XRI function Supported N/A
Slate Tone Generator Supported N/A
External Input Connector Amphenol XLR/TRS combo XLR

 

Supported Media

SD card
Maker Series Model Capacity
Panasonic SDHC (UHS-I / Class10) R:90MB/s W:45MB/s RP-SDUC32GJK 32GB
SanDisk Extreme Pro SD UHS-II card SDSDXPK-032G-JNJIP 32GB
SanDisk Extreme Pro SD UHS-II card SDSDXPK-064G-JNJIP 64GB
SanDisk Extreme SDXC™ UHS-I card (U3, Class10) SDSDXVE-064G-JNJIP*1 64GB
SanDisk Extreme SDXC™ UHS-I card (U3, Class10) SDSDXVF-128G-JNJIP*1 128GB
SanDisk Extreme® SDHC™ UHS-I Card (U3,Class10) SDSDXNE-016G-JNJIP*1 16GB
SanDisk SanDisk Extreme Pro® SDHC™ UHS-I Memory Card (Class10) SDSDXPA-016G-J35N 16GB
SanDisk SanDisk Extreme Pro® SDHC™ UHS-I Memory Card (Class10) SDSDXPA-032G-J35N*1 32GB
SanDisk SanDisk Extreme Pro® SDHC™ UHS-II Memory Card SDSDXPB-016G-J35 16GB
SanDisk SanDisk Extreme Pro® SDHC™ UHS-II Memory Card SDSDXPB-032G-J35 32GB
SanDisk SanDisk Extreme Pro® SDHC™/ SDXC™ UHS-I Memory Card (U3, Class10) SDSDXPA-016G-JU3 16GB
SanDisk SanDisk Extreme Pro® SDHC™/ SDXC™ UHS-I Memory Card (U3, Class10) SDSDXPA-032G-JU3*1 32GB
SanDisk SanDisk Extreme Pro® SDHC™/ SDXC™ UHS-I Memory Card (U3, Class10) SDSDXPA-064G-JU3 64GB
SanDisk SanDisk Extreme Pro® SDHC™/ SDXC™ UHS-I Memory Card (U3, Class10) SDSDXPA-128G-JU3 128GB
SanDisk SanDisk Extreme® PLUS SDHC™ UHS-I Memory Card (Class10) SDSDXS-016G-J35P*1 16GB
SanDisk SanDisk Extreme® PLUS SDHC™ UHS-I Memory Card (Class10) SDSDXS-032G-J35P*1 32GB
SanDisk SanDisk Extreme® SDHC™ UHS-I Memory Card (Class10) SDSDXL-016G-J35*1 16GB
SanDisk SanDisk Extreme® SDHC™ UHS-I Memory Card (Class10) SDSDXL-032G-J35*1 32GB
SanDisk SanDisk Extreme® SDHC™/ SDXC™ UHS-I Memory Card (U3, Class10) SDSDXL-016G-JU3*1 16GB
SanDisk SanDisk Extreme® SDHC™/ SDXC™ UHS-I Memory Card (U3, Class10) SDSDXL-032G-JU3 32GB
SanDisk SanDisk Extreme® SDHC™/ SDXC™ UHS-I Memory Card (U3, Class10) SDSDXL-064G-JU3 64GB
SanDisk SanDisk Standard SD™/SDHC™ Memory Card (CLASS4) SDSDB-008G-J01 8GB
SanDisk SanDisk Ultra® PLUS SDHC™ UHS-I Memory Card(Class10) SDSDUM-016G-J01*1 16GB
SanDisk SanDisk Ultra® PLUS SDHC™ UHS-I Memory Card(Class10) SDSDUP-008G-J35 8GB
SanDisk SanDisk Ultra® PLUS SDHC™ UHS-I Memory Card(Class10) SDSDUP-016G-J35 16GB
SONY SDHC UHS-I Memory Card SF-8UY2 8G
SONY SDXC/SDHC UHS-I Memory card SF-UY3 Series SF-128UY3*1 New 128GB
SONY SDXC/SDHC UHS-I Memory card SF-UY3 Series SF-16UY3*1 New 16GB
SONY SDXC/SDHC UHS-I Memory card SF-UY3 Series SF-32UY3*1 New 32GB
SONY SDXC/SDHC UHS-I Memory card SF-UY3 Series SF-64UY3 New 64GB
SONY SDXC/SDHC UHS-I Memory card SF-UY3 Series SF-64UY3*1 New 64GB
TASCAM TSQD TSQD-16880A*1 16GB
TASCAM TSQD TSQD-32A 32GB
TOSHIBA EXCERIA PRO™ SDHC/SDXC Memory Card (SD-KU Series) SD-KU016G 16GB
TOSHIBA EXCERIA PRO™ SDHC/SDXC Memory Card (SD-KU Series) SD-KU032G 32GB
TOSHIBA EXCERIA™ SDHC/SDXC Memory Card(SD-FU Series) SD-FU008G 8GB
TOSHIBA EXCERIA™ SDHC/SDXC Memory Card(SD-FU Series) SD-FU016G 16GB
Transcend SDXC/SDHC UHS-I Speed Class 3 TS32GSDU3X 32GB

Reviews

There are no reviews yet.

Be the first to review “DR-100MKIII”