245 SE 1st St, #401, Miami, Florida 33166

305 - 722 59 10 acosta@centurionusacorp.com   EnglishPortugueseSpanish
  
4K-HDBaseT-4x4_02
4K-HDBaseT-4x4_01
kenexpro200

4K HDBaseT™ 4×4 Matrix Switcher

The KanexPro MX-HDBASE4X4-4K matrix switcher is a professional 4 HDMI input to 4 HDBaseT output switch with 2 HDMI mirrored outputs designed for routing 4K/UHD applications. For proficient audio capabilities it includes 4 stereo audio and 4 digital coax outputs for de-embedding to analog audio and HDMI digital audio respectively. Audio sources can also be selected via RS232 commands. Selected audio is sent via HDMI outputs & HDBaseT outputs and the audio output sockets.

Category: Tags: , ,

Product Description

4K-HDBaseT-4x4_banner

 

The KanexPro MX-HDBASE4X4-4K matrix switcher is a professional 4 HDMI input to 4 HDBaseT output switch with 2 HDMI mirrored outputs designed for routing 4K/UHD applications. For proficient audio capabilities it includes 4 stereo audio and 4 digital coax outputs for de-embedding to analog audio and HDMI digital audio respectively. Audio sources can also be selected via RS232 commands. Selected audio is sent via HDMI outputs & HDBaseT outputs and the audio output sockets.

The matrix switcher also features Ethernet port for controlling via web based GUI which reduces installation time and complicated set-up as well as full control for the matrix. The HDMI inputs from the matrix can be controlled via front panel buttons, IR, RS232, or thru a web-based GUI using IP. The selected source is delivered to HDMI Output 1~2 (for HDMI input 1~2) & HDBaseT outputs 1~4 (easy extension to 70m at 1080p and 35m at 4Kx2K on a single CAT5e/6 connection with optional PoE based HDBaseT receivers) simultaneously.

Applications:

Ideally designed for higher education environments such as smart classrooms, multi-zone residential homes or commercial distribution applications, this matrix is rack-mountable and also includes international power supply.

To reduce video dropout problems from lighting, ceiling fans and other EMI issues, it is strongly recommended to use shielded CAT5e/CAT6 and use shielded RJ45 connectors with our HDBaseT products.

 


 

Features

  • Ultra-fast 4×4 switching with instant display
  • Distribute four HDBaseT outputs up to 70m at 1080p & 35m at 4Kx2K on a single CAT5e/6 cable
  • Supports power over Ethernet (PoE) to all four receivers
  • Two HDMI mirrored outputs for local monitor support
  • Deep color support up to 16 bit
  • RGB/YCbCr 4:4:4, YCbCr: 4:2:2, 4K/30Hz
  • Illuminated buttons w/ Front panel LCD
  • Dedicated audio zones for digital and stereo audio
  • Audio De-embedding
  • Advanced EDID & HDCP management
  • Bi-directional IR & RS-232 control
  • Ethernet connectivity
  • Control via front panel, RS232, IR or IP
  • IR remote control included
  • Easy firmware upgrade thru Micro-USB port
  • Locking HDMI connectors
  • 19″ (1U) rack-mountable steel enclosure
  • External International power supply (100V-240V AC,50/60Hz)
  • Backed by KanexPro 3 -Year full parts & labor warranty

 


 

Tech Specs

 

Video Input Video Output
Input 4 HDMI Output 2 HDMI
4 HDBaseT
Input
Connector
Female HDMI Output
Connector
Female HDMI
Female RJ45(with LED indicators)
Video
Signal
HDMI,DVI or DisplayPort Video
Signal
1 HDMI
1 HDBaseT
Input Level T.M.D.S. 2.9V~3.3V Output Level T.M.D.S. 2.9V~3.3V
Input Impedance 100 Ohm (Differential) Output Level Impedance 100 Ohm (Differential)
Video General
Gain 0 dB Bandwidth 10.2 Gbps
Video Signal HDMI (or DVI-D) Resolution range Up to 4Kx2K@30Hz
Transmission
Distance
1080P@60Hz =70m
4Kx2K@30Hz =35m4Kx2K@30Hz = 8m via HDMI
Switching
Speed
200ns (Max)
EDID
Management
Built-in EDID data and manual EDID management
HDCP Supports HDCP 1.4, auto and manual HDCP management.
Audio Input Audio output
Output Signal Stereo audio
Digital audio
Output
Connector
4 3-pin
pluggable terminal blocks
4 Coax (RCA)
Stereo
Output
Earphone output: distortion 0.1% 32O/70mW@1KHz, 0.1%
16O/105mW @1KHz, support PCM
Coax
Output
Supports PCM, Dolby Digital, DTS, DTS-HD
Frequency
Response
20Hz~20KHz
Control Parts
Control /
Remote
4 IR OUT (green)
4 IR IN (black)
1 IR EYE (black)
1 TCP/IP (female RJ45)
1 RS232 (9 pin female D)
4 RS232 (3-pin pluggable terminal blocks)
Panel
Control
Front panel buttons RS232
Control
9-pin female RS232
connector
IR Built-in IR sensor
Extended IR receiver
TCP/IP
Control
Web-based GUI
General
Temperature -10 ~ +40C Reference
Humidity
10% ~ 90%
Power
Supply
DC 24V 2.5A Power
Consumption
48W (Max)
Dimension
(W*H*D)
437 x 44 x 235 mm
(1U high, full rack wide)
Product
Weight
2.0Kg

 


 

Diagram

 

Diagram

 


Downloads

 

Manual – (7 mb.)

Product Sheet – (786 kb.)

Crestron Drivers – (1 mb.)

 

Reviews

There are no reviews yet.

Be the first to review “4K HDBaseT™ 4×4 Matrix Switcher”

Menu
Menu
×